How to install a vinyl cut sticker

If you’ve recently purchased a vinyl cut sticker from Inknition and are unsure how to install it, don’t worry! With a few simple steps, you can have your sticker applied smoothly and securely. Follow these instructions to ensure a successful installation.

How to install a vinyl cut sticker:

---

Gather your materials.

Before you begin your journey into how to install a vinyl cut sticker, make sure you have all the necessary materials. You will need the sticker itself, a squeegee or credit card, masking tape, rubbing alcohol, and a clean cloth. It’s also important to make sure the surface you will be applying the sticker to is clean and dry.

Clean the surface where you will apply the sticker.

The first step on how to install a vinyl cut sticker is to clean the surface where you will be applying it. Use rubbing alcohol and a clean cloth to remove any dirt, dust, or debris. Make sure the surface is completely dry before moving on to the next step. This will ensure that the sticker adheres properly and lasts as long as possible.

Peel off the backing paper from the sticker.

Once you have cleaned and dried the surface, it’s time to peel off the backing paper from the sticker. Start by peeling a small corner of the paper away from the sticker. Be careful not to touch the adhesive side of the sticker with your fingers, as this can leave oils and dirt that will affect the sticker’s ability to adhere. Use a pair of tweezers or a craft knife to help you peel the paper away from the sticker if necessary.

Apply the sticker to the surface.

Once you have peeled off the backing paper, carefully place the sticker onto the surface you want to apply it to. Start at one end and work your way across, smoothing out any bubbles or wrinkles as you go. You can use a credit card or squeegee to help you smooth out the sticker and ensure it adheres properly. Be sure to apply even pressure across the entire sticker to avoid any air pockets or creases. Once the sticker is in place, gently rub over it with a soft cloth to ensure it is securely attached.

Smooth out any bubbles.

After carefully placing the vinyl cut sticker onto your desired surface, it’s important to smooth out any bubbles or wrinkles to ensure a clean and professional look. Using a credit card or squeegee, start at one end and work your way across the sticker, applying even pressure as you go. This will help to eliminate any air pockets or creases that may have formed during the application process. Once you have smoothed out the sticker, gently rub over it with a soft cloth to ensure it is securely attached.

Contact Inknition today to order your stickers!